-5 to 5 Degree 100 Kw Low Temperature Chiller for Pakistan
-5 to 5 Degree 100 Kw Low Temperature Chiller for Pakistan
| Unit Price: | 12000~38000 USD |
|---|---|
| Min. Order: | 1 Piece/Pieces |
| Supply Ability: | 3000PCS/Year |
|---|---|
| Port: | Huangpu |
Product Description
-5 to 5 Degree 100 kw Low Temperature Chiller for Pakistan
Send inquiry to Customize your own Low Temp Chiller at the bottom
Features:
1.High efficiency and energy saving:
The unit can intelligent control according to load demand: 100%, 75%, 50%, 25% (or start), 0, saving energy.
The total number of the screw compressor parts is only 1/10 of the conventional compressor. Simple structure, few wearing parts , there are no inlet and exhaust valves, the humidity is not sensitive, the failure rate is extremely low, the screw compressor can run for 40,000 hours without trouble. .
3. Reliable operation
We can manufacture non-standard units according to different power supply systems in different countries, also we can customize screw-type integrated units, anti-corrosion units, explosion-proof units and other special units according to user requirements.
A variety of refrigerant options:22, R407C, R134a ,etc.
Technical Data
below are 80~170kw models specifications. we also have 180~1300kw model, please contact us for more information.
About SANHER
SANHE Freezing Machinery (Guangzhou)Co., Ltd. is a joint venture which was established by domestic Huizhuo and Japan Ronghe corporation with a total investment of 50 million Yuan in 2017. It located in Guangzhou Economic and Technological Development Zone . Combined with Japan R&D center and Guangdong University of Technology, We are committed to Industrial Chiller, central air conditioner, magnetic centrifugal chiller R&D and manufacture.
Our Main Product:
1) Magnetic Bearing Centrigufal Chiller
2) Water cooled screw chiller, Air cooled screw chiller, Flooded type Screw Chiller ,Evaporative Cooled Screw Chiller
3) Water cooled scroll chiller, Air cooled scroll chiller
4) Water-cooled Packaged air conditioner, Air-cooled Packaged air conditioner , clean constant temperature and humidity air conditioner, Precision air conditioning
5) Low temperature chiller(0ºC to -50ºC)
6) Anti-corrosion Chiller , Explosion-proof Chiller, etc
Factory Show
We have our own laboratories and prefessional testing Line. All SANHER chillers are factory tested under load conditions to ensure easy installation for users.
Cases
Certificates
Packing&Shipping
Plastic film+standard export plywood case with forklift truck feet, easy to load and unload
Shipping by sea, by truck, or by train
Free of charge to replace new chillersif quality problems.
Cost price to buy extra parts with Chillers from Sanher if needed.
Video technical support
Online support(Email, Skype, Wechat, Whatsapp, Telephone...)
Engineers available to service machinery overseas if needed
Necessary info to Quote
1.What is your cooling capacity?_____ Kcal/hr or _____KW or _____RT?
2. What's your power supply? For example: 3800V-50Hz-3N (N=Phase )
3.What refrigerant type do you require? R22 or R134a or R407c?
4. What's your ambient temperature? And what is your chiller inlet and outlet water temperature?
5. Which industry do you use the chiller in?
FAQ
Q1: Are you a manufacturer?
A1: Yes, we have more than 10 years in Water Chiller business. New plant was bulit in 2017 in Guangzhou Economic&Technological Development Zone. Welcome to visit us anytime!
Q2: Could you help us to recommend the model for our project?
A2: Yes, we have engineer to check the details and make the scheme for you. Based on the following:
1)Cooling capacity;
2) Refrigerant;
3) Ambient temperature;
4)Voltage;
5) For what industry
6)The building drawing(if you have)
7)Any other special requirements.
Q3: How to ensure your product with good quality?
A3: We use the well-know brand accessories, such as Hanbell , copeland, danfoss compressor, Emerson expansion Valve, Siemens controller. All SANHER chillers are factory tested under load conditions to ensure good quality and easy installation for users.
Q4: What's the warrenty?
A4: 1 year warrenty for free if confirmed by both side damage in the quality reason.
Q5: Whats your payment term?
A5: We accept TT, LC, Western Union, etc. Normally ,30% deposit for production, 70% balance before shipment.
Q6: How can I place an order?
A6: Contact us via made in China or contact below information.
Ms.Livia
Tel:0086 13590226431
SANHER have a vast experience with low-temp chillers for every process need. Whether you need -50ºC or -5ºC, we are here to help you complete that task. We will take the time to understand your process and operating condition before making an equipment selection.
SHDL series screw type low temperature chiller is developed, designed and manufactured by SANHER. According to the temperature of chilled water(Ethylene glycol) , it is divided into seven types: high temperature type, medium temperature type, quarter low temperature type, sub-low temperature type, low temperature type, deep low temperature type and ultra low temperature type. Each type has 32 standard specifications . The cooling range is from 99KW to 462KW, and the temperature range of the chilled aqueous solution is -50°C to 0°C. The unit is suitable for refrigeration,Medical reaction kettle, food processing, quick freezing, industrial cooling ,etc.Send inquiry to Customize your own Low Temp Chiller at the bottom
Features:
1.High efficiency and energy saving:
- The unit adopts high efficiency twin-screw compressor ,runs efficiently under full load and partial load.
- Patented screw rotor design to increase compressor speed.
- The Heat Exchanger adopts a new high-efficiency heat transfer tube and counter flow design to enhance the heat transfer efficiency on the water side and the refrigerant side ,improve efficiency.
The unit can intelligent control according to load demand: 100%, 75%, 50%, 25% (or start), 0, saving energy.
The total number of the screw compressor parts is only 1/10 of the conventional compressor. Simple structure, few wearing parts , there are no inlet and exhaust valves, the humidity is not sensitive, the failure rate is extremely low, the screw compressor can run for 40,000 hours without trouble. .
3. Reliable operation
- The unit has 7 kinds of safety protection measures to ensure the normal operation.
- The unit is designed for dual-circuit and dual-compressor. When one compressor fails, the other compressor can still operate normally without affecting the customer's use.
- All units are tested by the safety inspection system before leaving the factory to ensure the performance.
- The unit is filled with refrigerant and lubricating oil before leaving the factory. The customer only needs to connect the inlet and outlet pipes and the power supply to run.
- The unit adopts the microcomputer control system, the interface can displays the fault content directly, which is convenient to know the fault in time and elimination.
We can manufacture non-standard units according to different power supply systems in different countries, also we can customize screw-type integrated units, anti-corrosion units, explosion-proof units and other special units according to user requirements.
A variety of refrigerant options:22, R407C, R134a ,etc.
Technical Data
below are 80~170kw models specifications. we also have 180~1300kw model, please contact us for more information.
| Model | SHDL- | 50WZ I | 60WZ I | 70WZ I | 80WZ I | 90WZ I | |||||
| Refrigerant | R22 | R404A | R22 | R404A | R22 | R404A | R22 | R404A | R22 | R404A | |
| Nominal cooling capacity | ×1000kcal/h | 69.6 | 72.7 | 86.8 | 91.1 | 103.2 | 105.8 | 119.5 | 120.4 | 146.2 | 141.9 |
| KW | 81 | 85 | 101 | 106 | 120 | 123 | 139 | 140 | 170 | 165 | |
| Input power | KW | 23 | 24 | 29 | 30 | 34 | 35 | 40 | 40 | 48 | 47 |
| Comp.Power×QTY (kw×unit) | 25.4 | 31.5 | 31.8 | 39.2 | 39.2 | 44.0 | 44.7 | 48.9 | 51.5 | 56.9 | |
| Comp.current (A) | 51 | 61 | 63 | 74 | 76 | 83 | 86 | 92 | 95 | 104 | |
| Power Supply | 3Phase-380V-50HZ | ||||||||||
| Protection Device | Reverse phase protection,phase loss protection,overcurrent protection,high and low voltage protection,low temperature protection,water flow protection | ||||||||||
| Number Of Refrigeration Circuit | 1 | ||||||||||
| Capacity Control (%) | Stepless Capacity Control or 0,25,50,75,100 | ||||||||||
| Condenser | 23 | 24 | 29 | 30 | 34 | 35 | 40 | 40 | 48 | 47 | |
| Water Side max Pressure (Mpa) | Shell-and-Tube Type | ||||||||||
| Dia.of pipe to Condenser (Inch) | 1 | ||||||||||
| Dia.of pipe to Condenser(inch) | 2″ | 2-1/2″ | 2-1/2″ | 3″ | 3″ | ||||||
| Cooling Water Flow (m³/h) | 18.3 | 20.0 | 22.8 | 25.0 | 27.4 | 28.7 | 31.6 | 32.5 | 38.1 | 38.2 | |
| Condenser Water Pressure drop(Kpa) | 21 | 25 | 29 | 32 | 35 | ||||||
| Evaporator | Shell-and-Tube Type | ||||||||||
| Water Side max Pressure(MPa) | 1 | ||||||||||
| Dia.of pipe to Evaporator(inch) | 2″ | 2-1/2″ | 2-1/2″ | 3″ | 3″ | ||||||
| 25%Glycol Flow Capacity(m³/h) | 14.7 | 15.4 | 18.4 | 19.3 | 21.8 | 22.4 | 25.3 | 25.5 | 30.9 | 30.0 | |
| Evaporator Water Pressure drop(KPa) | 26 | 29 | 34 | 36 | 42 | ||||||
| Running noise Db(A) | 65 | 65 | 66 | 66 | 68 | ||||||
| Total Weight(kg) | 1200 | 1350 | 1540 | 1680 | 1800 | ||||||
| Running Weight(kg) | 1440 | 1620 | 1850 | 2020 | 2160 | ||||||
| Note: | |||||||||||
| 1. Nominal cooling capacity based on: Evaporator inlet and outlet water temperature 0 °C /-5 °C, Condenser inlet and outlet water temperature 30 °C / 35 °C, Fouling coefficient 0.088 m2. ° C / KW; 2. If the condenser inlet and outlet water temperature is 32 °C / 37 °C, and the evaporator inlet outlet temperature remains 0 °C /-5 °C , the cooling capacity is 97.5% of the nominal cooling capacity; 3. The temperature range of chilled solution: -10 ° C ~ 0° C; 4. Cooling water temperature range: 15 ° C ~ 40 ° C; 5. Specifications and dimensions will be subject to change without notice. | |||||||||||
Applications
The low temperature chillers are ideal for Medical reaction kettle,Medical distillation, Medical equipment,laboratories, semiconductor, medical, pilot plants,food and beverage process and custom applications that require accurate and precise ultra-low temperature control.
Outline DiagramAbout SANHER
SANHE Freezing Machinery (Guangzhou)Co., Ltd. is a joint venture which was established by domestic Huizhuo and Japan Ronghe corporation with a total investment of 50 million Yuan in 2017. It located in Guangzhou Economic and Technological Development Zone . Combined with Japan R&D center and Guangdong University of Technology, We are committed to Industrial Chiller, central air conditioner, magnetic centrifugal chiller R&D and manufacture.
Our Main Product:
1) Magnetic Bearing Centrigufal Chiller
2) Water cooled screw chiller, Air cooled screw chiller, Flooded type Screw Chiller ,Evaporative Cooled Screw Chiller
3) Water cooled scroll chiller, Air cooled scroll chiller
4) Water-cooled Packaged air conditioner, Air-cooled Packaged air conditioner , clean constant temperature and humidity air conditioner, Precision air conditioning
5) Low temperature chiller(0ºC to -50ºC)
6) Anti-corrosion Chiller , Explosion-proof Chiller, etc
Factory Show
We have our own laboratories and prefessional testing Line. All SANHER chillers are factory tested under load conditions to ensure easy installation for users.
Cases
Certificates
Packing&Shipping
Plastic film+standard export plywood case with forklift truck feet, easy to load and unload
Shipping by sea, by truck, or by train
After-sales service
Free of charge to replace new chillersif quality problems.
Cost price to buy extra parts with Chillers from Sanher if needed.
Video technical support
Online support(Email, Skype, Wechat, Whatsapp, Telephone...)
Engineers available to service machinery overseas if needed
Necessary info to Quote
1.What is your cooling capacity?_____ Kcal/hr or _____KW or _____RT?
2. What's your power supply? For example: 3800V-50Hz-3N (N=Phase )
3.What refrigerant type do you require? R22 or R134a or R407c?
4. What's your ambient temperature? And what is your chiller inlet and outlet water temperature?
5. Which industry do you use the chiller in?
FAQ
Q1: Are you a manufacturer?
A1: Yes, we have more than 10 years in Water Chiller business. New plant was bulit in 2017 in Guangzhou Economic&Technological Development Zone. Welcome to visit us anytime!
Q2: Could you help us to recommend the model for our project?
A2: Yes, we have engineer to check the details and make the scheme for you. Based on the following:
1)Cooling capacity;
2) Refrigerant;
3) Ambient temperature;
4)Voltage;
5) For what industry
6)The building drawing(if you have)
7)Any other special requirements.
Q3: How to ensure your product with good quality?
A3: We use the well-know brand accessories, such as Hanbell , copeland, danfoss compressor, Emerson expansion Valve, Siemens controller. All SANHER chillers are factory tested under load conditions to ensure good quality and easy installation for users.
Q4: What's the warrenty?
A4: 1 year warrenty for free if confirmed by both side damage in the quality reason.
Q5: Whats your payment term?
A5: We accept TT, LC, Western Union, etc. Normally ,30% deposit for production, 70% balance before shipment.
Q6: How can I place an order?
A6: Contact us via made in China or contact below information.
Ms.Livia
Tel:0086 13590226431
Product Categories : Low Temperature Chiller > 0 degree
Premium Related Products
Other Products
Hot Products
Xinxiang Jiahui FRP 100t square cross flow cooling towerJIAHUI E-Glass Fiberglass Chopped Strand Mat Supplierhigh quality 400T Cross Flow Square Water Cooling TowerLight Weight Reinforced Molded Fiberglass FRP Grating for toilethot sale Fiberglass insulation double 4 step ladder with safety railJIAHUI large capacity FRP chemical storage tanksFRP White competitive price carbon fiber tubeCooling tower motor reducer1.5"" abs rotating cooling tower sprinkler head 4 bladeRectangle frp cooling tower system shell for water treatmentABS Material 4 Blades small cooling fan on saleTop grade pvc water eliminator for cooling towerJIAHUI FRP cooling tower pvc glueChina cheap cooling tower spray nozzleJIAHUI classical s wave cooling tower fill packStainless steel closed coil pipe cooling tower