Large Air Cooled Screw Chiller for Cold Storage

Large Air cooled screw chiller for Cold Storage
1. High Efficiency
2. Low Operation Cost
3. Customize Design

       SANHER SHKL series screw chillers adopt the excellent 5:6 rotor high-efficiency twin-screw compressor as the refrigeration core, equipped with high-quality and high-efficiency condenser and evaporator, supplemented by precise PLC computer control system, and assembled by elaborate processing.
       There are dozens models of SHKL series chiller with cooling range from 62KW to 3672KW, and the chilled water temperature adjustment range is 7°C~12°C.
       The chiller can be widely used in hotels, hospitals, office buildings, shopping malls, apartments, factories and other places.

Features:
1. High Efficiency

• Using high efficiency 5:6 rotor twin-screw compressor, the chiller operate with high efficiency in both full load and part load.
• Patented screw profile design, improve the compressor efficiency.
• High efficiency heat exchange tube and countercurrent design of the Heat Exchanger, improve the heat transfer efficiency on the water side and refrigerant side.

2. Low Operation Cost

• By intelligent control, The chiller can adjust the load to 100%, 75%, 50%, 25%, 0.
• The total parts number of the screw compressor is only 1/10 of the conventional compressor. With Simple structure, few wearing parts, no inlet and exhaust valves, not sensitive to the humidity, the failure rate of Screw Chiller is extremely low.  Our screw chiller can run for 40,000 hours without trouble.

3. Customize Design
We can produce the non-standard chillers according to different countries, different power supply system or different customer request. Also we can customize screw-type integrated units, anti-corrosion unit, explosion-proof unit and other special industry units according to customer request.  There are a variety of refrigerant options, such as R22, R407C, R134a and other refrigerant.

Specifications:
50KW to 396KW model with 1 compressor, 1 regrigeration circuit.
101KW to 792KW model with 2 compressors, 2 regrigeration circuits. 
About SANHER
            SANHE Freezing Machinery (Guangzhou)Co., Ltd. is a joint venture which was established by domestic Huizhuo and Japan Ronghe corporation with a total investment of 50 million Yuan in 2017. It located in Guangzhou Economic and Technological Development Zone . Combined with Japan R&D center and Guangdong University of Technology, We are committed to Industrial Chiller, central air conditioner, magnetic centrifugal chiller R&D and manufacture.
           We have our own laboratories and prefessional testing Line. All SANHER chillers are factory tested under load conditions to ensure easy installation for users.    

Our Main Product:
1)   Magnetic Bearing Centrigufal Chiller
2)   Water cooled screw chiller, Air cooled screw Chiller, Flooded type Screw Chiller ,Evaporative Cooled Screw Chiller
3)   Water cooled scroll chiller, Air cooled scroll chiller
4)   Water-cooled Packaged air conditioner, Air-cooled Packaged air conditioner , clean constant temperature and humidity air conditioner, Precision air conditioning
5)   Low Temperature Chiller(0ºC to -50ºC)
6)   Anti-corrosion Chiller , Explosion-proof Chiller, etc.

Certificate



Cases



PACKAGE
Plastic film + wooden frame/wooden box  for exporting



FAQ
Q1: Are you a manufacturer? 
A1: Yes, we have more than 10 years in Water Chiller business. New plant was bulit in 2017 in Guangzhou Economic&Technological Development Zone. Welcome to visit us anytime!

Q2: Could you help us to recommend the model for our project? 
A2: Yes, we have engineer to check the details and make the scheme for you. Based on the following:
1)Cooling capacity;
2) Refrigerant;
3) Ambient temperature;
4)Voltage;
5) For what industry
6)The building drawing(if you have)
7)Any other special requirements.  

Q3: How to ensure your product with good quality? 
A3: We use the well-know brand accessories, such as Hanbell , copeland, danfoss compressor, Emerson expansion Valve, Siemens controller.  All SANHER chillers are factory tested under load conditions to ensure good quality and easy installation for users.

Q4: What's the warrenty? 
A4: 1 year warrenty for free if confirmed by both side damage in the quality reason. 

Q5: Whats your payment term?
A5: We accept TT, LC, Western Union, etc. Normally ,30% deposit for production, 70% balance before shipment.

Q6: How can I place an order? 
A6: Contact us via made in China or contact below information.
Mr.Terry
Tel:+008616624753086