water chiller industrial water cooled scroll chiller
|Payment Type:||L/C,T/T,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||1 Set/Sets|
|Delivery Time:||25 Days|
|Place of Origin:||China|
Model No.: TY-10W
water cooled chiller,Water Cooling Chilling Equipment,Water-cooled chiller,Water Chiller unit,water cooling chiller machine,water cooling chilling equipment,Box-type Water Cooled Chiller,Packaged Water Cooling Chiller Machine: the compressor sucks the low-temperature and low-pressure refrigerant gas after evaporation and refrigeration, and then compresses it into a high-temperature and high-pressure gas to send to the condenser; after the high-pressure and high-temperature gas is cooled by the condenser, the gas is condensed into normal temperature and high pressure liquid; when the normal temperature and high pressure liquid It flows into the thermal expansion valve, which is throttled into low-temperature and low-pressure wet steam, which flows into the shell and tube evaporator, absorbing the heat of the chilled water in the evaporator to lower the temperature of the water; the evaporated refrigerant is sucked back into the compressor and repeated Next refrigeration cycle.
Six characteristics of water-cool chiller:
1. Water-cooled chillers are safer in operation and easier to maintain and repair.
2. The high-quality compressor is the heart of the water-cooled chiller, with a built-in safety protection system, low noise, power saving and durable.
3. The water-cooled chiller is made of the latest high-efficiency externally threaded copper tube. It has a very small size, fast heat dissipation, compact structure, high reliability, beautiful appearance, high efficiency and energy saving.
4. The water-cooled chiller unit is equipped with a single-chip control system, built-in compressor dryer filter and expansion valve, maintenance hand valve interface, etc., so that the equipment runs safely and is convenient for maintenance.
5. The Water Tank evaporator has a built-in automatic water replenishment device, which saves the water tank in the engineering installation, is convenient for installation and maintenance, and is suitable for special occasions such as large temperature difference and small flow.
6. The multi-function operation panel of the water-cooled chiller is equipped with an ammeter, control system insurance, compressor switch button, water pump switch button, electronic temperature controller, safety protection fault light, unit start-up indicator light, simple operation and convenient use.
Water-Cooled Industrial Chiller
Lubricating Oil Location Compressor Inside
Type Special High Purity Luburicating Oil
Parameter Exhaust pressure PA 13~20
Working temperature °C ≤45
Total power KW/h 13.5
Working current A 27
total weight Kg 50
Operating weight Kg 65
Size m 1.90*0.90*1.46
Main Future 1. Use the world famous compressor as the core power.
2. Adjustable temperature and automatic intelligent control.
3. Safety protection and instruction function to ensure safe operation.
4. Protection level: IP54
5. High strength pressure test, water system withstand pressure 1.6 ~ 2.0Mpa, fluorine system 2.5 ~ 3.0Mpa
6. After the debugging of automatic constant temperature test bench, the products are delivered to ensure the best performance.
7. The equipment can run continuously for 24 hours.
Protective Device 1. Phase loss, reverse phase protection
2. Motor overload protection
3. High and low pressure protection
4. Water shortage and insufficient flow protection
5. Fully automatic temperature control system
Item Name Brand of Origin
Compressor Panasonic, Japan
Contactor / thermal protector LS, Korea
Refrigerant DuPont, USA
Filter drier ALCO, USA
Expansion valve Danfoss, Denmark
Chilled water pumps SOUTH, Hangzhou
304 stainless steel water tank TOYOCOOL, Shenzhen
Cooling fan MaEr, Hangzhou
Finned condenser TOYOCOOL, Shenzhen
Coil evaporator TOYOCOOL, Shenzhen
Hydraulic pressure gauge (high and low pressure) Toako, Kunshan
Pressure controller Heli, Feng Hhua
Controller MINAMOTO, Taiwan
water cooled industrial chiller, cooling water in industry,water cooling industrial systems,water cooling unit industrial ,water cool chiller machine
Toyocool(China) was established in 1993, known as a large-scale refrigeration enterprise with early start-up, complete production line and good competitiveness in Southern China. For over 26 years, Toyocool keeps providing temperature control solutions for industrial process and continues to satisfy customers in more than 30 industries worldwide. Toyocool is a group company integrating R&D, design, production, sales, engineering and service. Main products include: screw chiller, air-cooled chiller, water-cooled chiller, acid and alkali chiller, explosion-proof chiller, low temperature freezer, mold temperature machine, water-cooled central air-conditioning, cold storage, etc., which are widely used in electroplating, electronics, plastics, chemicals, food, medicine, machinery, construction, automotive, new energy and other industries. With hundreds of specifications in multiple series, Toyocool product can be customized according to customer needs.
- Company Name: Shenzhen Toyocool Refrigeration Equipment Co.,Ltd.
- Representative: LI SIYANG
- Product/Service: Water chiller , Industrial chiller , Water Cooled Chiller , Air Cooled Chiller , Heat Exchanger , Cooling Tower
- Capital (Million US $): 10,000RMB
- Year Established: 2015
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 1% - 10%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Building 17, Third industrial zone, Longxi community, Longgang District, Shenzhen City, Guangdong Province
- Contact Person: Ms. Lynn
- Tel: 86-0755-84877928
Premium Related Products