Integrated Water Cooling System
| Packaging: | Standard packing ensures proper protection during transportation |
|---|---|
| Brand: | SANJIU |
| Place of Origin: | Jiangsu, China (Mainland) |
Basic Info
Model No.: GTM-120
Product Description
Integrated Water Cooling System
GTM Series are of regular capacities from 6 to 305 nominal tons. Casing made in special alloy coated steel or stainless steel, Heat exchange coils made in stainless steel or red copper. GTM Towers tend to be more compact, taking less installation space, working without any wet deck fill, more suitable to cool hot water of higher inlet temperature. The towers dimensions can be customized to suit standard containers or particular project conditions. GTM towers are widely applied in different fields, to cool circulating water, oil or other process fluid for Melting/ Vacuum/ Multi-crystal Furnaces, Induction Heaters, Compressors, Heat Pumps, Metal Parts Production Lines, Hydraulic Stations, Power Generators, Transformers, Converters, etc.
Compatible with numerous process fluids
(water, water/glycol, oil, other fluids)
◆ Capable and flexible in customized solutions
◆ Factory assembled for maximal installation convenience
◆ Modular design suits a wide range of heat rejection duties
◆ Compact design with minimal footprints
◆ Multiple corrosion resistant options
◆ Low sound operation options available
◆ More optimizing options available
◆ Performance and quality guaranteed
◆ Super long service life
STRUCTURE & CASING
TStandard enclosure is made of a special type of highly corrosion-resistant steel sheet coated with a composition of Zn+Al(11%)+Mg(3%), and a trace amount of silicon, originally imported from Nippon Steel or Posco. The panels are sheared and folded precisely in whole cold machining process, then densely bolted and sealed for water tightness, with sufficient reinforcing bars, preventing deforming during hoisting process in fields. Each tower is completed with maintenance access and doors of maximized size for inspection convenience.
EVAPORATIVE COOLING COILS
GHM series adopt high efficient heat exchange coils. Optimized coils has effectively reduced air-side resistance, suitable to work with larger amount of spray water, and significantly improved heat transfer efficiency. The Heat Exchanger combines one or more coils supported by steel structure, firm and durable. This whole section is of patented design, easy to eliminate cooling medium fluid. Standard coils tube made in stainless steel 304/316, or red copper and titanium ally on option. Different wall thickness can be met on request. Each coil is tested under continuous nitrogen gas pressure of 30 bars for 24 hours.
DIRECT-DRIVE AXIAL FANS
GHM series adopt direct-drive axial fans of local leading brands, fitted with resin or al-alloy airfoil blades perfectly balanced and coupled to a weather proof TEFC three-phase electric motor. The fan casing is a galvanized steel cylinder to draw the air vertically and avoid the risk of recirculation. The tip speed of the impeller is limited to keep the noise level within acceptable limits.
SPRAY PUMP
Standard spray pumps are of GZ horizontal centrifugal series from GSD brand, with motor of brand TECO, specially designed for evaporative cooling equipments, of generally large flow rate but low pumping head. The selected pumps are of dynamic-static balance, with shaft as an extended section from the motor, for most reliable concentricity. With first grade bearings, the pumps run at minimized vibration and low noise. Mechanic seals avoid abrasion to shaft, no leakage in long term service life. Overload protected on any point of the performance curve, not exceeding the rated power during the whole working period.
A Cooling Tower is a heat exchange system that removes waste heat from a process system fluid, usually water. Cooling towers are used in both commercial and industrial applications.
Product Categories : Customized Cooling Tower
Premium Related Products
