Find Mini Cooling Tower, Portable Cooling Tower , Natural Draft Cooling Tower on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Closed Circuit Square Liquid Cooling Tower
Home > Products > Mini Tower > Closed Circuit Square Liquid Cooling Tower

Closed Circuit Square Liquid Cooling Tower

    Packaging: Standard packing ensures proper protection during transportation
    Brand: SANJIU
    Place of Origin: Jiangsu, China (Mainland)

Basic Info

Model No.: GTM-2

Product Description

 

GTM Series Counter Flow Closed Water Cooling Tower

GTM Series have been developed since 2011, with capacities ranging from 5 to 250 tons/ unit/ hour. This series is finished with alloy (Mg-Al-Zn) coated steel, or stainless steel enclosure, stainless steel or copper heat exchange coils. Besides, this series can be integrated with circulating pumps and valves on options. 
As counter flow towers, the cool air is inlet through both sides of the tower from the bottom, then drawn upwards through the whole heat exchange coils, against the spraying water in the opposite direction, eventually outlet with heat. 
GTM Towers tend to be more compact, taking less installation space. And it’s without PVC filling stuff, more suitable to cool hot water of higher temperature. This series are also widely applied in different fields, to provide circulating cooling water or other liquid for HAVC system, air compressors, melting shops, heating machines, chemical plants, and food industries etc.

Product Description
 

 

 

Closed Circuit Square Liquid Cooling Tower

 

 

 

Note: All the data is under the condition of 28℃ wet temperature.

If any change of condition,the data will change.

 

 

Model no.

GTM-2(closed circuit)

Water flow rate

10m³/h, adjustable as different temperature

Cooling capacity

From 65~55to45~35

Water pressure

0.32Mpa

Pipe diameter

Input diameter(mm)

DN50

Output diameter(mm)

DN50

Rated Power

Fan (KW)

0.55

Spray pump(KW)

0.75

Material of shell/tower body

Superdyma(imported from Japan)

Material of tupe

SUS304;Red copper

Installation Method

Modular Design,Easy Install

 

 

 

 

Closed water cooling tower shell is made in Mg-Al-Zn alloy coated steel, of "SuperDyma" series from company Nippon Steel, originally imported Japan. This special alloy coated steel is much better than galvanized steel in corrosion proof performance

 

 

 

 

 

 

The primary use of cooling towers is to remove the heat absorbed in the circulating cooling water system used in power plants, petroleum refineries, petrochemical plants, natural gas processing plants, food processing plants, semi-conductor plants Etc… So Same Cooled Water Can Be Used Again… Which Saves Precious water …The smallest cooling towers are designed to handle water streams of only a few Liters of water per minute supplied in small pipes like those might see in a residence, while the largest cool hundreds of thousands of Liters per minute supplied in pipes as much as 15 feet (about 5 meters) in diameter on a large power plant.
 
A Cooling Tower is a heat exchange system that removes waste heat from a process system fluid, usually water.Cooling towers are used in both commercial and industrial applications.

 

 
 
 
 
Company Information

 

 

 

 

  

Packaging & Shipping

 

 

Our Services

 

-Quick response in 12 hours

-Professional and economical cooling solution for every client

-Considerate and complete after sales service

 

FAQ

 

 

Below information are normally required to know for selection of a most proper tower model and solution:

 

Application:     (Explanations: Where the cooling towers will be used for? e.g. for HAVC system, Air Compressors, Melting Furnaces, etc.)
* Water Flow Rate:   /h (Explanations: How many Tons of water required per hour?)
* Inlet Water Temp.:   °C (Explanations: Temperature of hot water to be cooled) (also descriped as "water temperature drop")
* Outlet Water Temp.:   °C (Explanations: Temperature of cooled water, usually it shall be at least 3~4 °C higher than the wet-bulb temp.) 
* Wet-bulb Temp.:   °C (Explanations: Highest wet bulb temp. of the location/area or city to install the tower is essential to know to evaluate the size of towers)
* Power Supply:     (Explanations: 380V/3 Phases is standard, which we could have in stock, but for customized towers, the delivery time could be longer)

 

For easier discussions, 24 hours on line service available: Angela is online: skype: oasanjiu Mob./WhatsApp: 13559666650

 

Many thanks for your interests, and your inquires are always well attended!

Contact us if you need more details on Liquid Cooling Tower. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cooling Tower、Counter Flow. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Mini Tower

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters

Premium Related Products